I love this place and places like it: small, conspicuous, bustling, family feeling. Give them a cylinder head, and back youll get a very clean, carefully prepared gift to your ailing engine. Happy to give them my business! Its a BMW so Im sure Ill be back real soon.Ask for Bobby with your bimmer questions, s52, s54, m52, m54 all good, and whatever else 👍

Scroggins rebuilt my GT40 heads and Im happy with their work. They were responsive, great to work with, and very helpful. I would recommend to anyone.

Scroggins does excellent work for a very reasonable price. I had both my cylinder head rebuilt and block work done for my forged turbo BP engine build. The guys are very knowledgeable and friendly, and had my engine parts back to me in perfect condition in a timely manner. Highly recommended, I will definitely take all my future projects to them.

Dropped my Jeeps 4.0L cylinder head off to Bobby yesterday. I dont know a huge amount about engines / cylinder heads and he gave me some great info on the engine itself, the initial opinions of my cylinder head - and just overall didnt make me feel like an idiot for asking stupid questions. Great place. Excited to see the end result!

Excellent Work on a unique engine that many would not touch.Resurfaced head and block, new valves and seals, new rod components, refit cam and crank. Great Job, Thank You

Very detail work! A1 service

Tom is very professional over the phone made me feel comfortable about there services and what they bring to the table highly recommend!!!

Hands down best machine shop I’ve ever dealt with. I’ve done business with them before on smaller projects, but the way they handled the motor build for my 2018 WRX was just flawless. The built my short block and head and did amazing work. And considering all of the other work they had going, they got everything done in a very timely manner. To add to all of that Bobby, tommy and butch are just great. They really took care of me, and when you speak to them their knowledge of their craft is astounding and it’s very obvious that they know what they’re doing. They are all also very down to earth and informative. Great experience with this shop every time and I’d recommend anybody to them. And I most certainly will continue to do business with them, projects small and big.

My whole experience was great!!!!!!!!!!!!!!!!! Their business model works very well. You get a factory backed engine with great warranty. Tom is easy to reach and deal with. Jeep running very well after two weeks, just like new.

Very nice place getting my Mercedes 300d head done there very cool staff

Called and inquired about a specific procedure in machine work they said we can do it. I brought my block in and explained to them that they were the only shop around because I had already called several shops and Scroggins said we can do that for you no problem. A few days later he calls and says no we cant do that service. Theres no one in the area that can do this which is what I already explained previously. I told him I was going to pick up my block because his shop couldnt do the procedure. When I went to pick up they charged me $165 for something they didnt even do. That was confirmed by the new shop that I directly brought the block to. They inspected the block and said you got ripped off. How about that not only did they lie about the work they stole my money.

We have been using Bobby for many years. Always professional and he has a ton of experience. I highly recommend his shop for machine repair.

One of the best place I have been to and they were very professional gave me lots of information and make sure I was doing the correct way I will return to this company again for more Feature work

They really know there work, and they sure know how to explain in detail, whats going on. I give them two thumbs up!👍👍

Great work on my ram 1500 rebuild. Highly recommend!

Very knowledgeable and helpful regarding questions about parts, build, etc. Prices are reasonable and most of their work is done in house. Professionals about their business.

I had a 5.3 LS motor rebuilt . I installed it myself then developed an oil leak with under 4000 miles on the build . I called to talk to Tommy he was not there . When I finally got a response it was a message on my voicemail stating the motor had to be returned to him in the same state he got it. no help even to find where its leaking from.

A friend recommended this place for a head rebuild and valve job on my 280Z. These guys are A! MAY! ZING! Quick, affordable, and professional; they even suggested an Awesome (Z) shop to take my Datsun to.Bobby was exceptionally friendly and shared the same passion I had on my project car. I simply cant recommend these guys enough!

I have used these guys when I was at the dealership for all our Head and valve job repairs. Now I have my own shop and they have done multiple jobs for me and never had any issues. Its hard to find a machine that does quality work, but these guys are the real deal and we will keep using them. Thanks guys!

Had them build a 2jzgte short block. Very helpful and experienced Im running 30+psi 700+whp e85 5000+ hard miles so far runs perfect great compression, break in went perfect couldnt be happier. Thanks !

I had a head resurfaced here for my Honda Civic, (blown head gasket).Bobby helped me out from start to finish, and even answered some questions I had via phone promptly and professionally.The quality of the machine work was absolutely flawless and the pricing was very reasonable. I have 6000 miles on my rebuilt top end since Scroggins did the machine work..., it runs like a champ !!I recommend these guys whole heartedly.They take pride in their work, and even signed the cylinder head with a silver sharpie after machining. I thought that was cool. Artists always sign their work! Thanks Scroggins !

Cant say enough good things about this shop. Knowledgeable crew, honest and fair prices, and good response and turn around times on jobs. Took a head in to test for cracks and unfortunately the head was bad, but they were able to work with me to figure out the best next steps with the budget I have for my project. Ive got peace of mind knowing Im putting in good parts in my project while staying under budget.

Had them rebuild my 3.0L pathfinder that we have had in our family for 22 years. Before taking the motor to them I called and asked a million questions. EVERYTHING I ASKED AND WANTED THEY KNEW EXACTLY WHAT I HAD AND NEEDED NOT EVEN SEEING IT!! Its been almost 11 months and it has never ran or sounded this good in years. Great people to deal with and will recommend them to anyone that need a rebuild or head work. Just do what they tell you when you get it back and will not have a problem. Five star in my book!

Ask for bobby, thats all you need to know. If you want a trustworthy, reliable and honest job done to your vehicle this is the place to go. I just recently had a cracked head cylinder on my jeep and I can say I have a peace of mind now that I am riding on it thanks to them. They explain things throughly and a far as expense, it is fair for the treatment you receive.

Great bunch of guys. Honest and fair. Highly recommend.

I recently had an aluminum head (4-cylinder PT cruiser) rebuilt at Scroggins Machine Shop. Bobby was very helpful in evaluating the head and determining the best course of action. I feel like getting the head rebuilt was a much better option as opposed to buying a rebuilt head from one of these mass production shops--it also turned out a little cheaper too. Even though the pricing was just a little higher than competing shops, I feel it was well worth it to have someone knowledgeable and reliable performing the work. Bobby was also very helpful in providing advice on best practices for the installation of the cylinder head.I wouldnt hesitate to use Scroggins in the future.

I just met Bobby at Scroggins today, and I must say that Im impressed by the shops efficiency, tidiness, and quality. Their work seems to be spot on, and they are happy to talk to you about your project in a professional, yet very friendly, manner. After some initial confusion, I was able to track down my Honda CB750 moto head and cylinders, which turned out to have a bent exhaust valve.I have another upcoming project after this one, and I will be returning directly to Bobby for that work as well. Thanks, guys. ~Peter

This place charges you whatever they feel like and PAY FOR THEIR OVERRATED RATES!!!!!!

These guys are very knowledgeable and professional in the the work they perform. Above all they are honest and treat you with respect.

My Dad and I have been using Scroggins for years. We have taken Mitsubishi, Chevy, BMW, Volkswagen, and Honda motors there and we always check their work when it is completed. Everything is good and within spec like it should be, and done in a timely manner too!

The best machine shop in town. These guys know their stuff cold.

Best machine shop in town and I have the experience to state that.

Great Machine Shop We use for all our Diesel needs.

They are not the most hospitable people but they do a great job, as a euro shop owner they are not cheap but if you want it done right they will get it done. I have tried dozens of machine shop and been screwed by all of them. I cant recall one job they have done that I had to redo. when I use to work at a major dealer we would take them our heads. Keep up the good work Bobby!I have been using them for 15 plus year never had a issue if I have a problem car that needs machine work that is the place. its a 100 plus degree in there shop in the summer they may be rude at times but I am a New Yorker I can Handle it! they are the best machine shop by fartake it from Little shop of motors

Very friendly and saved me a few hundred dollars with just one call. Great customer service!!!

I took my volvo 5 cylinder engine to this shop almost a year ago for machining (bore, hone, balancing, weightmatching, assemble and install forged internals) and ever since I got it back it has been problem free and making great power, I would recommend anyone looking to get machine work done here, they do an A+ job and have quick turn around time.

Talk to bobby.. he will definitely help you out to the needs you have

Ive had Scroggins Machine do the cylinder heads on two of my Mercedes engines, a 1989 5.6-liter V-8 in 2010 and a 1995 3.2-liter inline-six in 2013. Both jobs were done with quality and excellence. Bobby and his team will take care of you. They are not the cheapest in town, but the work will be done correctly, the first time. On my 3.2 inline six, I was unable to remove the cam tower bolts, and Scroggins did the extra work to remove the bolts and cam/towers for a very reasonable price. I look forward to using Scroggins Machine again the next time I pull the heads on one of my cars.

I have been using this machine shop for years, great service and excellent work. Thank you Bobby for all work done for us.

I know good people and these are good people Im really happy I came here.

Excellent work very professional and honest it doesnt get any better the only machine shop Ill ever use

Overpriced. Stay away far away.

Great Machine Shop!!! Very nice people.

BEST MACHINE SHOP IN TOWN AND FRIENDLY SERVICE TOO.

Highly experienced machine shop - I always come here for my local machining needs. Never had a job they werent able to handle.

If you want ur engine to do quality repair , than bring it here , Bobby will show you . What w r ing with your head or block , th e y got years of experience , except it took me 1 hour or more to get to down town , if only t his place was open. 30 miles to the west

I had a terrible experience here. I will give a little background first. I have used this shop a few times in the past to regrind ATV crankshafts which I never had a problem with. I measure them when they get back to me to verify a correct job. I have a personal project I have been working on for some time A 91 Nissan D21 with a turbo (KA24E) and have very limited time to work on it. I decided to send my block crank and rods over there to have the block bored and honed, rods shot peened and resized and the crank reground. This review has exceeded the character limit so I have to divide it up.1st of three problems. I sent a set of rods that I have checked, polished and balanced to Scroggins to have shot peened (an important step after polishing) and resized. A few weeks later I called to see what the progress was and was told that one of my rods was bent. I knew that that was not possible on account of me checking them before spending 10 hours polishing and balancing, I was told that the motor must have been hydrolocked at some point. I understand that rods do get bent and thought maybe it was bent by a few 10,000ths and I could not tell with my method of checking so I asked for them back so I could find a replacment rod, polish and balance it to the other rods. They were reluctant and said they could balance it but would not give me a price then after a few hours said they would send it back to me. Upon receiving it back i found a very obvious bend so bad that i could see it with my naked eye. During the time before they sent it back to me they sent a video of a rod being checked on a rod gauge, I suppose it was to try to prove to me that it was bent but the video was very low resolution and nothing could be determined from that. Anyways back to when I got it back, I saw hammer marks on the small end of the rod (the bent end) and could see scoring in the small end bushing as if a rough object had been rammed through it and though that is strange. I looked at all the pistons from that motor and there was no damage to any of them. I then was going to refit the pistons to the rods to install in their old block to see if it was possible to fit it in the cyl and line it up with the crank without causing damage to the piston (at this point I am giving them the benefit of the doubt and trying to prove to myself that the rod was bent before sending it to them). To my surprise I could no longer fit the wrist pin through the small end as the hammer marks and scoring upset the bore so much ( this is a floating pin setup ). So I called them back to tell them what I found and they said that there was no way they bent it. My final statement and proof of them lying about it is, in the video the rod on the gauge has a pin through it so there is no way that my rod was the one in that video. I ended up having to replace the set of rods and moved on to my next problem.2nd of three problems. My block needed to be rebored and as stated before I dont have time to do it myself and lack a powerstroke hone so I figured Id save myself the time and get them to do it. On getting the block back i saw that my pistons were not labled as to what cyl they go to I began to measure the bores and found that 2 cylinders had less than 5 ten thousandth of clearance and 2 of the pistons would not even fit in the bores. Spec is 15 to 20 ten thousandth and I requested that it be on the big side of that due to it being turbocharged. I called them and they said I probably dont know how to measure and it should be fine. THE PISTON DOES NOT FIT IN THE BORE!!! I do not need to know how to measure to tell you that there is not enough clearance. Then they said if I brought it back they would check it and if it was wrong they would fix it but I have no time for such incompetence I finish honed to 20 ten thou and went on to install the crank which brings me to the third problem.

I own a small vw shop in friendswood and have been using them for decking heads and rebuilding or just buying new heads from them for 5 yrs and only one mishap,,,, which theyve already picked up, tore down and are in the process of repairing right now. They do cosst a bit but u get what u pay for.

Best in town, i live in baytown and drive here, professionals, honest..

A+ operation, Most professional operation in town, Thank you .

Great work by great guys.

They did an excellent job of rebuilding the 70 sbc Corvette engine I took them in about 2002. Then they did a rebuild on another sbc engine, this one from my 67 Vette. They were fast, very knowledgeable and helpful. Unfortunately, the most recent rebuild had a pan leak and Tom fixed it without any hassles and with a smile on his face. NIce, competent folks and you deal with the owner, whos been doing this job forever.

Good work

Great service

Best machine shop in Houston

Good place

Best machinist in town!!!